Multi-Channel Thermocouples to CAN
xproThermo8 - when System Size matters …
xpro
©
Thermo8 - super compact 8 Channel Module
8 High-Res Thermo channels - easily expandable
xproThermo8 converts 8 thermocouple channels into CAN bus messages with
an impressive resolution of up to 0.01 C° at a rate of 10 Hz.
By default xproThermo8 is adapted for K-type thermocouples, other types can
be provided on request.
To avoid GND loops, each input channel has its own power supply and is
galvanically isolated from channel to channel.
With an input range of -200 °C...1200 °C xproThermo8 is an excellent tool for
high-temperature measurements, such as those required for red-hot brake
disks or for catalytic converter temperatures.
Up to 8 modules can be chained to a single CAN bus via the built-in CAN hub.
If required, we can provide an even higher number of channels.
Each input channel is equipped with an individual status LED. A quick glance
is all it takes to spot broken wires or a defective thermocouple!
need even more Channels ?
xproThermo32 - be a Winner in the Multi-Channel Race !
xpro
©
Thermo32 - 32 Channel Thermocouple Signal Conditioning
xproThermo32 - 32 Channels in High-Res Technology
xproThermo32 uses the same technology as xproThermo8, offering a
0.01 C° resolution, galvanic isolation, an internal CAN-Hub and Status-LEDs
for each Channel.
The difference is that xproThermo32 packs 32 channels into a single unit. If
your application requires even more than 32 channels - no problem with
xproThermo32 !
Simply add additional units via the internal CAN-Hub. As xproThermo32 uses
low-power technology both CAN-Signals and power can be tranferred over a
single connection.
Firmware and parameters can be easily updated via USB.
Get in touch with us if you are looking for a compact solution going beyond 32
channels in one single box - we‘ll built one for you.
Thermocouple to CAN -
xproThermo8 - when size and precision matter
xpro
©
Thermo8 - super compact Module
8 Thermo Channels with Resolution of 0.01 C°
xproThermo8 converts 8 thermocouple channels
into CAN bus messages with an impressive
resolution of up to 0.01 C° at a rate of 10 Hz.
By default xproThermo8 is adapted for K-type
thermocouples, other types can be provided on
request.
To avoid GND loops, each input channel has its own
power supply and is galvanically isolated from
channel to channel.
With an input range of -200 °C...1200 °C
xproThermo8 is an excellent tool for high-
temperature measurements, such as those required
for red-hot brake disks or for catalytic converter
temperatures.
Up to 8 modules can chained to a single CAN bus
via the built-in CAN hub. If required, we can
provide an even higher number of channels.
Each input channel is equipped with an individual
status LED. A quick glance is all it takes to spot
broken wires or a defective thermocouple!
xproThermo32 - win the Multi-Channel Race!
xpro
©
Thermo32 - even more Channels !
xproThermo32 - 32 Channels in a single Box
xproThermo32 uses the same technology as
xproThermo8, offering a 0.01 C° resolution,
galvanic isolation, an internal CAN-Hub and Status-
LEDs for each Channel.
The difference - xproThermo32 packs 32 channels
into a single unit. If your application requires even
more than 32 channels - no problem with
xproThermo32 !
Simply add additional units via the internal CAN-
Hub. As xproThermo32 uses low-power technology
both CAN-Signals and power can be tranferred over
a single connection.
Firmware and parameters can be easily updated
via USB.
Get in touch with us if you are looking for a
compact solution going beyond 32 channels in one
only single box - we‘ll built one for you.
Multi-Channel with 0.01 C°
modular expandable to 100++ Channels !
Automotive Test Equipment
